ICAM Incident Investigation
Find out why it really happened, so it doesn't happen again.
"Operator error" is where most investigations stop. It's where ours start.
When someone gets hurt, the pressure is on to close the report fast. The cause gets written up as “worker didn’t follow procedure”, the fix is “retrain and remind”, and the file goes in the drawer.
Six months later, a different person on a different shift has the same incident. The hazard never left. Only the name on the report changed.
What Happens After a Serious Incident?
A serious injury, illness or dangerous incident starts a clock under WHS laws (and Victoria’s OHS Act). You’ll need to:
- Notify your state regulator immediately once you're aware of it
- Preserve the incident site until an inspector arrives or tells you otherwise
- Keep a record of the notifiable incident for at least five years
- Show the inspector what caused it and what you've changed since
A regulator can issue improvement or prohibition notices on the spot. If it goes further, the question becomes whether you understood the risk before anyone was hurt. A thin investigation gives you nothing to stand on.
Three Signs Your Investigations
Aren't Working
Do your incident reports end with "retrain the worker"?
Is the same kind of incident coming back every few months?
Has something serious just happened, and no one in-house is far enough removed to investigate it fairly?
If any of these sound familiar, the real cause is still on your floor.
Let's find it.
Get to the Real Cause With an ICAM Investigation
ICAM (Incident Cause Analysis Method) is a structured investigation method widely used in Australian mining, energy and heavy industry. It works back from the incident through four layers: the defences that failed, what people did, the conditions they were working in, and the organisational decisions that created those conditions.
Our ICAM investigation will:
- Trace the incident past the person involved to the systems, pressures and decisions behind it
- Give you a clear, evidence-based report your board, insurer and regulator can follow
- Set corrective actions ranked by the hierarchy of controls, each with an owner and a due date
What That Looks Like in Practice
For example, a forklift clips a picker at a dock door. The first report says the picker wasn’t paying attention. An ICAM investigation asks why a pedestrian walkway crossed a forklift route at all, why night shift was a driver short, and why pick-rate targets were set without anyone checking the traffic plan.
The fix moves from “be more careful” to a separated walkway and a rostering rule. One of those stops the next incident. The other doesn’t.
You get findings that stand up to scrutiny and actions that actually get closed, not a report that sits in a drawer.
How a GSD Safety Investigation Runs
Every investigation follows our Assess, Align, Assure method, shaped around the incident in front of us.
ASSESS
what really happened
ALIGN
the findings with the root causes
ASSURE
the fixes are closed out and working
Investigations Led by Someone Who's Run the Floor
Rob McDonald has more than 25 years in workplace health and safety. He has led safety, environment and operational risk at group level for Freedom Foods Group (now Noumi), advised on a major hazard facility for BOC Australia and managed warehouse shifts at Coles. He knows how a shift really runs, and that's where most incident causes hide.
Fully Accredited





ICAM Investigation
Questions Answered
What is an ICAM investigation?
An ICAM investigation is a root cause analysis that uses the Incident Cause Analysis Method. It looks past individual error to the failed defences, workplace conditions and organisational factors behind an incident, so corrective actions fix the system, not just the person.
When should a business use ICAM instead of a standard incident report?
ICAM suits serious injuries, notifiable incidents, high-potential near misses and incidents that keep recurring. A standard report is fine for minor first aid cases, but if the same type of incident has happened twice, it needs a deeper look.
Should an incident be investigated by someone outside the business?
An external ICAM investigator has no stake in the outcome and no reporting line to protect. That independence makes findings more credible to boards, insurers and regulators, and makes staff more willing to speak openly.
Can GSD Safety investigate a near miss?
Yes. A near miss is the cheapest lesson you’ll get, because nobody was hurt. GSD Safety applies the same ICAM method to high-potential near misses so the cause is fixed before it becomes an injury.
How long does an ICAM investigation take?
It depends on the incident’s complexity and how many people need to be interviewed. GSD Safety will give you a clear timeframe after the first conversation.